AC240V 5kw Rack Mounted Load Bank for Generator Testing

• Customization: Available
• After-sales Service: 3months-1year
• Application: Electrical & Electronics
• Model NO.: 240V 5kW
• Power Factor: 1
• Power: 5kw
• Voltage: 240V
• Key Word: Load
• Color: Black
• Frequency: 50Hz
• Insulation Class: F
• Specification: About 18 kg
• Trademark: Triumph Load
• Origin: China

Product Description

AC240V 5kW Rack Mounted Load Bank for Date Center

Product Description

Introduction

Triumph load can simulate the real working conditions and provides a rigorous test regime for power supplies from 1kW to 60MW.Resistive, inductive(reactive),capacitive or combined load banks can be customized for any application.

They can be used for testing numerous sets in a workshop environment, or used for on-site commissioning, witness tests and proof trials.Custom-built load banks can be supplied for most powers, voltages, frequencies and sizes. Multi-voltage load banks are also available for operation over a large voltage range. At the same time, It can operate in parallel with more than two units.

Triumph load are available in stationary type for permanent installation or portable type with fork lift pocket

base,castors.Larger load banks, typically above 1200kVA, are based on an ISO container construction. Special finishes including custom paint colors and stainless steel casings can be supplied.

Main functions

Load test:The grading power within the rated value can be loaded to test the output capacity of the tested power supply.
Control mode:The load is equipped with 5 gear switches and 1 fan switch, which can be controlled by 5 micro circuit breakers (domestic well-known brands).
Fan power supply: The fan is installed near the air outlet. When the fan takes DC48V, use the input socket, switch the fan switch and start the fan. The power addition and reduction is realized by 5 gear combination of empty and open load.
 Temperature protection: When fan stops or load bank's temperature exceeds (85ºC), the sound and light alarm and cut off load bank

Product shows




 

Product Parameters

 

Technical Parameters
Rated Voltage /Frequency	AC single-phase AC240V 50Hz;
Rated power	Resistive load: 5kW
Load Step	Resistive load: Two circuits, each 1KW,1.5KW. Note: When used below the rated voltage, the gear power decreases according to Ohm's law.
Power Factor	1
Load accuracy	≤5%
Fan power supply	240V single phase 50/60Hz
Wire Connection	Port on load machine: three-core power base C14; Wiring position: Chassis rear panel, concave design.
Insulation Class	F
Class of protection	IP20
Cooling	Forced air cooling, forward air, back air. Leave no air inlet and outlet on the side of the chassis.
Casing Color	black
Dimension	4U: Size about 431mm*180mm*450 (width * height * depth), Both sides of the load are equipped with mounting ears and can be easily replaced.
Weight	About 18 kg
Transportation	Front panel with handles and detachable mounting ears on both sides.
Operating Environment Parameter
Working environment	indoor
Work Temperature	-10ºC~+40ºC.
relative humidity	≤95%;
Altitude	≤1500M
Atmospheric Pressure	86~106kPa

Company Profile

Company information

Hebei Kaixiang Electrical Technology Co.Ltd is a leading manufacturer in emergency power supply test & maintenance industry.Specialized in the design,R&D, manufacture of the capacity AC & DC load bank,it owns the largest intelligent power supply testing equipment R & D center in China.

The company's core technologies are independent research. There are ten patents,ten software copyrights and two corporate standards.It has been named the international advanced level scientific and technological achievements by Science and Technology Department of Hebei Province.

Kaixiang offer one-stop solutions to generator set & battery & UPS power manufacturers.Its products are widely used in data center,shipbuilding,offshore platform,state grid, nuclear power, hospital ,communication,railway,war industry etc filed.Kaixiang is strategy partner of many famous company,such as Cummins, Caterpillar, Kohler, Jiangnan Shipyard, CSSC,CSIC, State grid, China mobile, Tecent, Baidu, Sinopec, CETC etc. Some of its products have been exported to America, Singapore, Israel,Japan, United Kingdom, Saudi Arabia, Australia, South Korea,Thailand, Sri Lanka, Angola etc. Through years of development, "Triumph Load" already the first brand in power supply detection industry in China.

Certifications

Model Selection Guide

Application
Large generator system testing in ocean engineering, drilling facilities,ship construction etc
Factory testing for generator, static voltage characteristic test, speed characteristic test;
Marine generator overload protection test,parallel operation test,reverse power and reverse current protection test,
Assist shipyard in mooring test,sea trial test.
Assist with the acceptance of the vessel generator test
Eliminate the carbon deposition of generator
As the generator loading system
Periodic running test for standby generator
UPS inspection and maintenance
Ship battery charging/discharging system testing
The acceptance of new system and testing of servicing equipment
To reduce "wet stacking" problems

Exhibition
Our workshop

FAQ

Why choose us
1. Professional technical team with more than 20 years design experience.
2. Customized technical solutions meet customer's individual requirements.
3. Strict inspection procedures throughout the whole production flow.
4. Perfect after sales service create good user experience.
5. Reliable quality & competitive price maximize profits for customers.
6. Certified with CCS and ISO9001:2008 Quality Certificate.